01 2

Precautions on how to store your LED display

Many times we cannot install the LED display immediately due to some factors after we purchase it. In this case, we need to store the LED display well. As a precision electronic product, the LED display has high requirements on the storage method and the environment. If you are not careful, it may be the result of damage to the LED display. Today, MuenLED stands at the professional point of view of LED display manufacturers. Say how to store the LED display correctly.
When storing LED displays, you need to pay attention to the following eight points:

1. Preparation and Placement Surface

The place where the cabinet is to be placed needs to be cleaned and then paved with pearl cotton.

2. Module Stacking Guidelines

It is strictly forbidden to stack modules in disorder or stack more than 10 LED displays. When the modules are stacked, the lamp faces are placed opposite and isolated with pearl cotton.

3. Recommended Cabinet Placement

The placement of the LED display cabinet is recommended to be placed flat with the light facing up. If the number is too large and needs to be placed vertically, special attention should be paid to protection. It is forbidden to place vertically in places with large vibrations.

4. Handle Display Box with Care

The display box should be handled with care. When landing, the rear side first lands and then the lamp surface to the ground, so as not to be scratched.

5. Anti-Static Wristband Requirement

All staff must wear cordless anti-static wristbands when handling or installing.

6. Storage Environment Recommendations

The storage place of LED display should be as dry as possible, ventilated and without sunlight.

7. Moving and Installation Precautions

When moving the box, it should be lifted, and it should not be pushed or dragged away on the ground, so as to avoid damage to the bottom module caused by uneven ground. The cabinet should be kept balanced during the hoisting process, and should not swing or rotate in the air. When installing the cabinet or module, handle it with care, and throwing it is strictly prohibited.

8. Adjusting LED Display Product Guidelines

If the LED display product needs to be adjusted, use a soft rubber hammer to hit the metal part of the cabinet, and it is strictly forbidden to hit the module. Squeezing and collision between modules is strictly prohibited. In case of gaps, abnormal positioning, etc., it is strictly forbidden to use hard objects such as hammers to hit the cabinet and modules. You can pick up the cabinet to remove foreign objects and try again.

 

August 16, 2024 Product introduction No comments yet
1

LED displays in sports stadiums

In the ever-evolving landscape of sports and entertainment, technology plays a pivotal role in enhancing the fan experience. One of the most exciting innovations on the horizon is the creative application of LED screens in sports arenas and stadiums. This article explores the potential and impact of LED displays in these settings, shedding light on how they are set to revolutionize the way we watch and engage with sports.

Transforming the Game with LED Screens

In recent years, LED technology has undergone remarkable advancements, paving the way for its integration into various aspects of our daily lives. One of the most promising areas of application is in the realm of sports. LED screens are no longer just about displaying scores; they are becoming integral to the immersive experience of attending a live game.

Enhancing Fan Engagement: A Visual Extravaganza

Sports LED screens are not merely massive displays; they are dynamic canvases that can adapt to the pulse of the game. Whether it’s showcasing instant replays, player statistics, or heart-pounding moments, these screens have the power to captivate audiences in ways never seen before. The marriage of high-definition visuals and creative LED screens creates an immersive environment that transcends the traditional spectator experience.

Creative LED Screens: Unleashing Imagination

The future of sports entertainment lies in the hands of creative LED screens. These screens are not confined to the rectangular boundaries of traditional displays; instead, they take on various shapes and sizes, transforming stadiums into vibrant arenas of visual artistry. Imagine LED screens wrapping around the entire stadium, bringing to life dynamic visuals that respond to the ebb and flow of the game. This level of creativity opens up endless possibilities for sponsors, teams, and organizers to deliver a truly unique and memorable experience.

Key Applications: Beyond the Scoreboard

Interactive Fan Engagement:

Sports LED screens are transforming spectators into active participants. Through interactive activities such as real-time polls, trivia, and engaging games, fans become an integral part of the live event. The stadium transforms into an interactive playground, fostering a sense of camaraderie among attendees and enhancing the overall enjoyment of the game.

Live Social Media Integration:

In an era dominated by social media, LED screens seamlessly integrate live feeds from platforms like Twitter and Instagram. Fans witness their posts and comments on the big screen, creating a real-time digital community within the stadium. This not only connects fans with each other but also bridges the gap between the physical and virtual worlds of sports.

Real-Time Statistics and Analysis:

Gone are the days of waiting for halftime to access player statistics and game insights. Sports LED screens provide real-time data, delivering instant performance metrics, team statistics, and expert analyses during the game. This feature keeps fans informed and engaged, adding a layer of depth to their understanding of the match.

Dynamic Advertising and Sponsorship:

Sports LED screens serve as dynamic advertising spaces, moving beyond static logos. Advertisers can leverage the flexibility of LED technology to deliver targeted and captivating campaigns that adapt to the flow of the game. This not only enhances brand visibility but also enriches the overall visual experience for fans.

Event Information and Updates:

From weather forecasts to in-stadium promotions, LED screens act as central hubs for disseminating crucial event information. Fans receive real-time updates on upcoming fixtures, special events, and exclusive offers, contributing to their overall enjoyment of the sporting experience.

 

August 15, 2024 Bussiness, Product introduction No comments yet
20240814 000640

The advantages and role of outdoor LED display.

Outdoor LED advertising, as an emerging advertising medium, occupies an important position in today’s advertising industry with its unique advantages. This revolutionary innovation not only improves the efficiency and effectiveness of information communication, but also has a profound impact on urban image, cultural dissemination, and commercial environment. Compared to traditional advertising, outdoor LED display has outstanding advantages.

Excellent Visual Expression
Through high brightness, vivid color contrast, and dynamic video playback, outdoor LED advertisements can quickly attract the attention of pedestrians and drivers, improving the viewing rate of advertisements. This visual appeal is particularly important for brand building as it can help businesses stand out in fiercely competitive markets. Large brands often use outdoor LED advertisements to create eye-catching brand images in bustling commercial areas, thereby increasing brand market awareness. The audience who sees these advertisements may become potential customers of the brand, thereby increasing sales.

Flexible and Versatile Content
The content updates of outdoor LED advertisements are very flexible. Compared to traditional static billboards, LED screens can quickly change advertising content through remote control, allowing advertisers to adjust their advertising strategies in a timely manner based on market dynamics or specific activities. This flexibility is particularly important in various promotional activities or emergency situations.
Improve the Level of Urban Informatization
Outdoor LED advertising has played a positive role in improving the level of urban informatization. In some cities, LED advertising screens are not only used for commercial advertising, but also for publishing public information such as traffic information, weather forecasts, and emergency notices. The timely release of this information is of great significance for improving the quality of life and sense of security of urban residents.

 

Promote Marketing And Promotion
The role of outdoor LED advertising in urban marketing and brand communication cannot be ignored. They provide enterprises with an innovative platform, allowing brands to communicate with consumers in a more dynamic and interactive way. This form of advertising can combine modern technology, such as the interaction between augmented reality (AR) and virtual reality (VR), to provide viewers with an immersive experience, thereby deepening consumer memory of the brand.

Beautify Urban Landscape
Outdoor LED advertising also plays an important role in urban planning and beautification. They are not only advertising tools, but also a part of the urban landscape. Through artistic design and content display, these advertisements can be integrated into the urban environment, enhancing the beauty and modernity of the city. For example, some cities use outdoor LED screens to display local art and cultural heritage, in order to enhance the cultural atmosphere and attractiveness of the city.

In summary, outdoor LED advertising plays an indispensable role in modern society due to its unique visual appeal, flexible content updates, energy-saving and environmental protection characteristics, and contribution to urban aesthetics and informatization. It not only provides effective promotion channels for commercial brands, but also adds new dimensions to urban culture and information dissemination. With the advancement of technology and the continuous emergence of innovative applications, outdoor LED advertising will undoubtedly continue to play its important role in the advertising field and urban life.

More Energy-efficient and Environmentally Friendly Forms
The updating of digital content has reduced the material and labor costs of traditional printed advertisements, making advertising operations more cost-effective and efficient. In addition, compared to traditional illuminated billboards, LED screens consume less electricity while providing brighter and clearer images, which helps to reduce carbon footprint. This is particularly important for achieving sustainable urban environments.

 

Outdoor LED advertising greatly enriches the night view and cultural life of the city. In many world-renowned cities, outdoor LED screens have become a part of the city’s night scene, adding a sense of modernity and vitality to the city. In addition to commercial advertisements, these large screens are often used to display artworks, cultural activities, and public information, providing urban residents and tourists with a rich and colorful visual experience. The impact of outdoor LED advertising cannot be underestimated.

August 13, 2024 Bussiness, Product introduction No comments yet
02 6

How to choose the right rental LED display?

1. Enhanced Visual Impact
1.1 Brightness and Clarity
Rental LED screens are renowned for their exceptional brightness and clarity, making them stand out in any event setting. Whether indoors or outdoors, these displays ensure that your content is vibrant and easily visible to all attendees, even under varying lighting conditions.
1.2 High-Resolution Display
Featuring high-resolution panels, rental LED screens deliver sharp, detailed images that enhance the overall visual experience. From crisp text to vivid graphics and videos, every element on the screen appears sharp and professional, capturing the audience’s attention effectively.
2. Flexibility and Versatility
2.1 Customizable Sizes and Configurations
One of the key advantages of rental LED screens is their flexibility in size and configuration. Event organizers can choose from a wide range of screen sizes and aspect ratios to fit the venue and specific event requirements. Whether you need a large video wall for a keynote presentation or smaller screens for breakout sessions, rental options cater to diverse spatial needs.
2.2 Suitable for Indoor and Outdoor Events
Versatility is another hallmark of rental LED screens, as they are designed to perform optimally in both indoor and outdoor environments. These screens are equipped to handle various weather conditions and ambient light levels, ensuring consistent display quality throughout the event, regardless of the setting.
3. Cost-Effective Solution
3.1 Rental Options for Various Budgets
Renting LED screens provides a cost-effective solution for event organizers of all scales. Whether planning a local seminar or a global product launch, rental packages offer flexibility in pricing, allowing you to allocate resources efficiently without compromising on visual quality.
3.2 Elimination of Long-Term Investment Costs
By opting for rental LED screens, you avoid the upfront costs associated with purchasing display equipment outright. Additionally, ongoing maintenance and upgrades are managed by the rental provider, reducing the total cost of ownership and freeing up capital for other event essentials.
4. Easy Setup and Maintenance
4.1 Professional Installation Services
Rental LED screen providers offer professional installation services, ensuring seamless setup and optimal positioning of screens within the event venue. This professional touch not only saves time but also guarantees that the screens are aligned for maximum visibility and impact.
4.2 Remote Monitoring and Support
During the event, rental LED screen providers often offer remote monitoring and technical support services. This proactive approach allows for real-time troubleshooting and resolution of any display issues, minimizing disruptions and ensuring uninterrupted visual engagement for attendees.
5. Interactive and Engaging Experience
5.1 Real-time Content Updates
Keeping content fresh and relevant is crucial for maintaining audience engagement. Rental LED screens support real-time content updates, enabling organizers to display live social media feeds, event schedules, sponsor messages, and breaking news updates throughout the event.
5.2 Integration with Audience Participation Tools
Enhance attendee interaction by integrating LED screens with interactive tools such as live polls, Q&A sessions, and gamification elements. These interactive features not only captivate the audience but also foster a sense of participation and community engagement during the event.
6. Customization Options
6.1 Branding and Content Personalization
Personalize the event experience by customizing content displayed on LED screens to align with your brand identity and messaging. From branded graphics and logos to thematic visuals, customization options allow organizers to create a cohesive visual narrative that resonates with attendees.
6.2 Special Effects and Visual Enhancements
Create memorable experiences with special effects and visual enhancements available through rental LED screens. Dynamic animations, vibrant color schemes, and immersive displays can transform the event atmosphere, leaving a lasting impression on participants.
7. Eco-Friendly Choice
7.1 Energy Efficiency Benefits
LED screens are recognized for their energy efficiency, consuming less power compared to traditional display technologies. By choosing rental LED screens, event organizers contribute to reducing energy consumption and lowering the event’s overall carbon footprint.
7.2 Sustainable Event Practices
Embrace sustainability in event planning by incorporating rental LED screens, which are designed for durability and reusability. Minimizing electronic waste and adopting eco-friendly practices aligns events with global environmental initiatives, appealing to environmentally conscious attendees.
Conclusion
In conclusion, rental LED screens offer a multifaceted solution for enhancing event visuals and engaging audiences effectively. From their unparalleled brightness and high-resolution displays to flexibility in customization and interactive capabilities, LED screens elevate the overall event experience while providing cost-effective and sustainable solutions for event organizers. By leveraging the benefits of rental LED screens, organizers can create memorable, impactful events that resonate with attendees long after the curtains close.

August 13, 2024 Bussiness, Product introduction No comments yet
主图 scaled

Muenled shipped again today.

10th August 2024, First of all, congratulations to Shenzhen Muenled Technology Co,.LTD for shipping a container of LED displays today. Secondly, we would like to thank our customers for their trust and support to our company.

These LED displays will be exported to Brazil to meet the demand of the local market. The main product in this shipment is our hottest selling P3.91 set of LED displays. This shipment consists of 118 crates and some spare parts (modules, power supply, lifting beams, etc.), one of the crates contains 6pcs of 500*1000mm die-cast box cabinets.

Muenled AIRC3.91 indoor rental led display 500X1000MM Prodution Introdution for event led screen

https://www.youtube.com/watch?v=6mkCK7jKlfc

As an LED display supplier, we place great importance on product quality and customer satisfaction. During the manufacturing process, we have implemented strict quality control measures to ensure that each LED display meets the highest quality standards. We use advanced technologies and materials to ensure that our products offer superior performance and durability. Our LED displays are characterised by high brightness, high contrast ratio and high refresh rate to present clear and detailed images.
Our team has always been committed to providing our customers with high quality products and services, and we will continue to work hard to continuously improve the quality of our products and services to create greater value for our customers. If you have any questions or needs about our products, please feel free to contact us.

August 10, 2024 Bussiness, Product introduction No comments yet
图1

Outdoor LED display and indoor LED display difference

With the development of the market economy, the application of LED display will continue to expand. LED display as a new information dissemination tool, is now widely used in various industries. However, at present, some people do not understand the difference between indoor LED display and outdoor LED display, here we explain the difference between the two.

Difference one, the use of different environments
Indoor LED display because of the use of the location generally do not need to have waterproof, fire and other requirements, and outdoor LED display because of the diversity of the use of the environment on the adaptability of the product in a variety of environments poses a challenge. Outdoor LED display is after combining the results of research on the external environment under the application of preliminary design and post maintenance and repair of the system. Mostly used in large outdoor plaza, such as leisure plaza, commercial centre, advertising information release board, commercial street, railway station and so on. Indoor LED display relative to the outdoor environment is much better, not affected by high temperature, for waterproof also has no special requirements, indoor LED display for air humidity has high requirements, in the southern region of China encountered back to the south day season need to strengthen the ventilation measures, to maintain a dry environment before and after the indoor LED display screen.

Difference two, different brightness requirements
Outdoor strong light leads to outdoor LED display high brightness requirements. Outdoor LED display is generally placed in the sun under direct sunlight. If the brightness is not handled well, or reflections occur, the viewing effect will be affected.

Difference three, suitable for different viewing distance
The higher the pixel, the clearer the display, the larger the information capacity can contain, so the closer the distance suitable for viewing. Outdoor requirements for pixel density is not as high as indoor, because the observation of the specific far, so the pixel density is low, point spacing is larger than indoor.

 

P3.91 500x1000mm LED screen installation method

August 9, 2024 Product Assembly, Product introduction, Product video No comments yet
图9

Benefits of using removable LED screen rental

In today’s fast-paced world, businesses need innovative and effective ways to capture the attention of their target audience. One such method that has gained immense popularity is the use of mobile LED screen rentals. These versatile and dynamic displays offer numerous advantages for businesses looking to make a lasting impact. In this article, we will explore the various benefits of utilizing a mobile LED screen rental and how it can help businesses outperform their competitors.

1. Enhanced Visual Appeal

When it comes to grabbing attention, visuals play a vital role. Mobile LED screens offer a stunning visual experience with vibrant colors, high resolution, and dynamic content capabilities. Whether it’s an outdoor event, trade show, concert, or corporate gathering, the eye-catching display of a mobile LED screen instantly captivates the audience and leaves a lasting impression. The vivid imagery and engaging content can effectively convey the message, making it an excellent tool for brand promotion and marketing campaigns.

2. Flexibility and Portability

One of the significant advantages of using a mobile LED screen rental is its flexibility and portability. Unlike traditional static displays, these screens can be easily transported and set up at various locations. Whether you want to target different cities, events, or venues, mobile LED screen rentals provide the flexibility to reach your audience wherever they may be. The ability to move the screens ensures maximum exposure and allows businesses to adapt their advertising strategies based on changing circumstances and target demographics.

3. Wide Reach and Targeted Advertising

Mobile LED screens have the unique ability to reach a wide range of audiences. By strategically positioning the screens in high-traffic areas or at popular events, businesses can effortlessly capture the attention of potential customers. Additionally, with advanced targeting options, such as location-based advertising, businesses can tailor their content to specific audiences, ensuring that their message reaches the right people at the right time. This targeted approach minimizes wastage and maximizes the return on investment for businesses of all sizes.

4. Real-Time Interactivity

In today’s digital age, interactivity is key to engaging customers. Mobile LED screens offer real-time interaction capabilities, allowing businesses to connect with their audience on a personal level. Whether it’s displaying live social media feeds, hosting interactive quizzes, or showcasing user-generated content, these screens provide an immersive experience that encourages audience participation. The ability to foster engagement and create memorable moments sets businesses apart and helps build a loyal customer base.

5. Cost-Effective Advertising Solution

Compared to traditional advertising methods, a mobile LED screen rental offers a cost-effective solution for businesses. Instead of investing in expensive billboards, print ads, or static signage, businesses can leverage the power of dynamic LED displays at a fraction of the cost. Furthermore, the ability to customize and update content in real-time eliminates the need for reprinting or redesigning traditional materials, saving both time and money. This affordability makes mobile LED screen rentals an attractive option for businesses looking to maximize their advertising budget.

6. Measurable Results and Analytics

One of the significant advantages of digital advertising is the ability to measure the impact of campaigns accurately. Mobile LED screens provide businesses with valuable insights and analytics that can help optimize their marketing strategies. By tracking metrics such as impressions, engagement rates, and conversion rates, businesses can gauge the effectiveness of their campaigns and make data-driven decisions for future endeavors. This level of transparency and measurement ensures that businesses can continuously refine their approach and achieve better results over time.

7. Environmental Friendliness

As businesses strive to become more environmentally conscious, mobile LED screen rentals offer a greener alternative to traditional advertising methods. LED technology is energy-efficient and consumes significantly less power compared to other display options. Additionally, the ability to display digital content eliminates the need for printing materials, reducing paper waste and contributing to a sustainable future. By choosing mobile LED screen rentals, businesses can align their advertising efforts with their environmental goals and attract eco-conscious customers.

In conclusion, utilizing a mobile LED screen rental provides businesses with a wide range of advantages. From enhanced visual appeal and flexibility to targeted advertising and real-time interactivity, these screens offer a powerful tool to outperform competitors and captivate audiences.

 

 

August 8, 2024 Product Assembly, Product introduction No comments yet
photobank 4 3

How to build a stage rental LED screen?

Building a stage rental LED screen involves several crucial steps to ensure the setup is robust, visually appealing, and functional. Whether for concerts, conferences, or other events, a well-constructed LED screen enhances the audience’s experience. Here’s a comprehensive guide on how to build a stage rental LED screen

1.Assessment of Requirements

Before diving into the construction process, it’s essential to assess the requirements of the event. Consider factors such as screen size, resolution, viewing distance, and environmental conditions. These specifications will dictate the type and quantity of LED panels needed.

2.Selection of LED Panels

Choose LED panels that meet the event’s requirements in terms of resolution, brightness, and durability. Opt for panels with high refresh rates to prevent flickering and ensure smooth video playback. Additionally, consider the panel’s pixel pitch, which determines the screen’s image clarity.

3.Frame Construction

Construct a sturdy frame to support the LED panels. Use aluminum or steel truss structures that are lightweight yet robust. Ensure the frame is designed to withstand the weight of the LED panels and any rigging equipment used for installation.

4.Mounting of LED Panels

Carefully mount the LED panels onto the frame using rigging hardware such as clamps or brackets. Ensure proper alignment and spacing between panels to create a seamless display. Take precautions to prevent damage to the panels during installation.

5.Wiring and Connectivity

Connect the LED panels using reliable cables and connectors. Pay attention to cable management to minimize clutter and prevent tripping hazards. Test the connectivity of each panel to ensure they function properly and synchronize with the content source.

 

6.Content Calibration

Calibrate the LED screen to optimize image quality and color accuracy. Adjust settings such as brightness, contrast, and color temperature to suit the event’s lighting conditions. Use calibration software and tools to fine-tune the display for optimal performance.

7.Integration with Control Systems

Integrate the LED screen with control systems for seamless operation. Install video processors, media servers, and control consoles to manage content playback, switching, and scheduling. Ensure compatibility between the LED screen and control hardware.

8.Testing and Quality Assurance

Conduct thorough testing of the LED screen to identify any issues or defects. Test for image consistency, color uniformity, and panel functionality. Address any issues promptly to avoid disruptions during the event.

9.Installation and Rigging

Safely install the LED screen onto the stage or mounting structure using appropriate rigging techniques. Follow industry safety standards and regulations to prevent accidents or injuries during installation. Hire qualified riggers and technicians if necessary.

10.Maintenance and Support

Provide ongoing maintenance and technical support to ensure the LED screen performs reliably throughout the event. Regularly inspect the screen for signs of damage or malfunction and address any issues promptly. Have a backup plan in place in case of emergencies.

By following these steps, you can build a stage rental LED screen that meets the highest standards of quality, performance, and reliability. A well-constructed LED screen enhances the visual impact of any event and leaves a lasting impression on the audience.

 

Muenled AIRC3.91 indoor rental led display 500X1000MM Prodution Introdution for event led screen

August 8, 2024 Product Assembly No comments yet
装1

How to install LED display?

LED display as a high efficiency, energy saving, rich color display equipment, widely used in various occasions. However, for friends who contact LED display for the first time, how to install may be a headache.

First, the preparation of the LED display before installation

Before we start the installation, we need to make full preparations. First, make sure you have purchased the appropriate LED display and its accessories, such as bezels, mounting racks, cables, etc. Secondly, according to the size and weight of the display screen, choose the appropriate installation location and method, such as wall fixing, column fixing, etc. In addition, prepare required installation tools and materials, such as screwdrivers, electric drills, expansion screws, and levels.

Second, LED display assembly

1. Display frame assembly: according to the display size and design, the frame is assembled in order. Make sure that each border is firmly connected and not loose.

2. Display module assembly: Install the LED light beads on the display module according to the design drawings to ensure that the light beads of each module are arranged neatly and in the same color.

3. Cable connection: Connect the cables of each display module in sequence to ensure that the cables are properly and securely connected.

4. Power and control card connection: Connect the power and control card to the display according to the instructions to ensure that the connection is correct and stable.

Third, LED display installation

1. Secure the display: Secure the display to a wall or column based on the installation method and position prepared. Use expansion screws or corresponding fasteners to secure the frame.

2. Adjust the horizontal and vertical positions of the display. Use tools such as a level and screwdriver to adjust the horizontal and vertical positions of the display to ensure that the display is perpendicular to the ground and the four sides are level.

3. Test and debugging: Connect the power supply and control card, turn on the power supply, and test whether the functions of the display screen are normal. If there is a problem, timely adjustment and repair.

Fourth, the use and maintenance of LED display

After the installation, according to the actual needs, you can use the control card to edit and play a variety of graphic information. In the process of use, it should be regularly checked whether the connection line of the display screen is loose or damaged to ensure a safe and stable display effect. At the same time, clean the surface of the display regularly to avoid dust and dirt affecting the display effect.

Fifth, common problems and solutions

1. If the display is off, check whether the power supply is normal, whether the control card is working properly, and whether the connection cable is firm. Troubleshoot and fix problems one by one.

2. Blurred display: Adjust the focal length of the display or replace the corresponding lens. If the problem persists, the lamp bead or module may need to be replaced.

3. Display color distortion: Check whether the control card Settings and signal source are normal. If there is a problem, adjust the control card Settings or change the signal source.

4. Blinking: Check whether the refresh rate of the display is set correctly. If there is a problem, adjust the refresh rate setting.

5. Display jitter: Check whether the cable is firmly inserted and the signal source is stable. If there is a problem, fix it accordingly.

Through the above steps, you should have mastered the installation method of LED display. Please note that the problems you may encounter in practice and the solutions may vary depending on the situation. If in doubt or encounter difficulties, it is recommended to seek professional help or guidance. I hope this article can help you successfully complete the installation of the LED display!

LED display installation video

 

 

August 6, 2024 Product debugging, Product video No comments yet
04 1

Outdoor full-colour LED display screen is generally the best with P several?

“Outdoor full-colour LED display” generally with the best P several? I think a lot of people may not know about this problem, because not only you, about this problem I asked a lot of friends and even related industries, they get out of the results are also very difficult to have results. At present, the crystal yuan full-colour technology equipment outdoor full-colour LED screen models have P3, P4, P5, P6, P8, P10, for these types, how do we go to choose?

First, based on the viewing distance:
P generally represents the pixel pitch, and the value behind the P mainly refers to the distance between the two LED lamp beads, we usually call the point pitch. And the smaller the dot pitch value, the higher the unit pixel point, the clearer the display screen, the more suitable for close viewing, and the price is more expensive.

Therefore, it is recommended that you, for outdoor full-colour LED display, the distance is very close, generally using P4 or P5, a little farther away from the selection of P6 or P8, and then far away from the use of P10.

Second, according to the area:
Area less than 10 square metres, and sufficient funds, it is recommended to use P4 outdoor high-definition full-colour LED screen, area of 10 ~ 20 square metres, it is recommended to use P5 outdoor full-colour screen.
Area of 20 ~ 60 square metres, viewing distance of 6 metres away, it is recommended that the use of P6 full-colour LED advertising screen, the area is greater than 60 square metres, viewing distance of 8 metres away, it is recommended that the use of P8 outdoor screen.
P10LED full-colour screen is suitable for the clarity requirements are not high, and the LED screen area is large, simple display image video screen customers.

Through the above analysis: the viewing distance is farther away, LED screen area will certainly be larger, LED screen clarity requirements are not very high, so choose a large point spacing LED screen on the line, of course, if the budget is generous, you can also choose a small spacing screen, but the cost is much higher, not cost-effective.

Currently outdoor “full-colour LED display” model is the most common use of P6 and P8, so for outdoor LED display selection P several, according to your actual requirements, combined with the screen area, budget and other considerations, the most suitable is the best. I hope the appeal of these points can help you.

August 5, 2024 Product introduction No comments yet